Yacht & Boat Maintenance
Yacht Detailing and Bottom Work
- Awlwash & Awlcare application to hull
- Bottom Work – Prop speed application
The last year has been packed with preparations for the Annapolis to Bermuda Ocean Race. Of course we left the Electronics until the last minute, and I can’t tell you how grateful we are for the hard work you guys did in the last month. You installed our entire RayMarine electronics suite, and the speed and precision with which your team finished the work was remarkable. Our expectations were hugely exceeded!!
Thank you for your customer service, and you will always be our first choic…
Job order: Remove interior. Cut out and remove black Iron fuel tank. Design and dry fit new fuel tank mock up. Fabricate new tank – epoxy coat. Installation – plumb – test – assemble interior. Clean work area & report.
Client feedback: “The boat looks fantastic, everything was clean and one would never know the heavy dirty mess that was involved with this project. I turned over the engine, threw the dock lines off and had a couple hours on the bay, all systems go. I want to express my appreci…
I have Selene 48′ trawler. The Taiwanese carpenters are hard to match. But, I think Matt may just have given them some competition. He took a sample of our drawer front and matched it to perfection. That wasn’t an easy task with all the fine detail. He was even able to match the Ebony inlay on the cabinet top. His measurements were perfect and the cabinet fits beautifully. You know how…boats have more angles than geometry.
We had a time deadline of heading South. Matt made that deadline, workin…
I want to take a few minutes to say thank you for the excellent job in painting Equinox, our Sabre 362 sailboat. From start to finish, you have been wonderful to work with. Your ideas concerning scheduling and colors have been perfect.You have constantly kept us informed with progress notes and photos. The final bill is exactly on estimate with extra work that you kindly performed without fee. Best of all the boat turned out magnificent. We’re delighted with the high quality of the work!…
You really are one of the only service folks down there that seems to reply and respond as questions get asked. It truly is a rare customer service level you keep. It’s amazing how poor others are at it.
Dear Tom,I wanted to thank you for the excellent work Frank and Matt did in installing the new electric winch kit. They look nice, work perfectly, and make such a difference. I also wanted you to know how much I appreciated you and your team going above and beyond to trouble shoot and fix my engine problems so I could leave on my ten week trip to Maine this summer. Diversified Marine is the best!
While returning from New England in July, 2014 on our Sabre 42 Express powerboat, “SHIBUMI”, we experienced significant fiberglass and gelcoat damage while attempting to enter a marina on the Mannesquan River in NJ during a heavy current in the midst of a violent thunderstorm.
Upon returning to Annapolis, we interviewed several marine contractors, including Tom Kicklighter of Diversified Marine Services , requesting bids to repair the boat. Within a couple of days, Tom had examined the boat and…
Last fall my 1997 Gemini 105M was struck by lightning. Almost everything electrical was damaged, and the electronics were fried. Frank Hoot came on board, assessed the damage, developed a plan and executed it perfectly.
Not only was he able to identify the lightning problems, he identified and correct electrical issues carried over from the manufacturer. He brought the boat up to current ABYC standards. This was all done as part of the plan. He also helped me deal with an extremely difficult ve…
I must tell you that the service you provided me was exemplary. I have owned a lot of boats and dealt with many yards and contractors; and the experience I had with you was top shelf. I greatly appreciate it… and when I am back on the water will always keep you in mind.
Dear Tom and Crew,
Thanks for your terrific work on “Cato” both last winter and over the years we have owned her. Matt’s terrific Lexan main hatch panels came out looking so nice the owner of the Hinckley across the dock demanded to know where we got them so he could have you make some for him (his came out pretty nice too).
There were some “ships carpentry” items that were past my skill level. Head door hinges etc. They made it onto last winter’s “list” and you guys did a superb job …
P.O. Box 4373
Annapolis, MD 21403
7416 Edgewood Road
Building 7401, Suite 5
Annapolis, MD 21403