Fiberglass Fabrication & Installation
Swim Platform & Steps – Design, Fabrication, Installation
1987 Defever POC 53′ – “Heavenly Daze”
Not only am I extremely impressed with your service and technical skills (including Brook’s), but your integrity is impeccable.
Mario did a first class job installing the new rudder on my boat. He was knowledgeable, tireless, and determined to do a perfect fit. There was a minor setback with some fiberglass that refused to harden but your staff rose to the situation, replaced the questionable patch, delayed the launch, and finished the project at full speed. I am pleased with the results and you are welcome to use me as a reference if you have a future customer with a similar project.
Please express my thanks to Mario…
Dear Tom and Crew,
Thanks for your terrific work on “Cato” both last winter and over the years we have owned her. Matt’s terrific Lexan main hatch panels came out looking so nice the owner of the Hinckley across the dock demanded to know where we got them so he could have you make some for him (his came out pretty nice too).
There were some “ships carpentry” items that were past my skill level. Head door hinges etc. They made it onto last winter’s “list” and you guys did a superb job …
I have Selene 48′ trawler. The Taiwanese carpenters are hard to match. But, I think Matt may just have given them some competition. He took a sample of our drawer front and matched it to perfection. That wasn’t an easy task with all the fine detail. He was even able to match the Ebony inlay on the cabinet top. His measurements were perfect and the cabinet fits beautifully. You know how…boats have more angles than geometry.
We had a time deadline of heading South. Matt made that deadline, workin…
The last year has been packed with preparations for the Annapolis to Bermuda Ocean Race. Of course we left the Electronics until the last minute, and I can’t tell you how grateful we are for the hard work you guys did in the last month. You installed our entire RayMarine electronics suite, and the speed and precision with which your team finished the work was remarkable. Our expectations were hugely exceeded!!
Thank you for your customer service, and you will always be our first choic…
Last fall my 1997 Gemini 105M was struck by lightning. Almost everything electrical was damaged, and the electronics were fried. Frank Hoot came on board, assessed the damage, developed a plan and executed it perfectly.
Not only was he able to identify the lightning problems, he identified and correct electrical issues carried over from the manufacturer. He brought the boat up to current ABYC standards. This was all done as part of the plan. He also helped me deal with an extremely difficult ve…
My 1996 J/105 had a badly oxidized gel coat, faded decks and several small cracks in the fiberglass decking. I hired Diversified Marine to perform this major restoration for several reasons:
- Quality workmanship: Diversified Marine took the time to lay out his process to restore the boat in detail. It became evident to me that DMS would not take any shortcuts that would lead to a sub-standard job. Throughout the restoration, Tom immediately addressed anything he felt could compromise the end pr…
One seldom encounters a business dedicated to superb quality of work, coupled with on-time performance at a fair price. Diversified Marine Service is such a company.
With a three week trip out of town, FROLIC was hauled in August for some minor gel coat repair and an awlgrip paint job. The deep luster of the flag blue paint is phenomenal.
We could not be more pleased.
Job order: Remove interior. Cut out and remove black Iron fuel tank. Design and dry fit new fuel tank mock up. Fabricate new tank – epoxy coat. Installation – plumb – test – assemble interior. Clean work area & report.
Client feedback: “The boat looks fantastic, everything was clean and one would never know the heavy dirty mess that was involved with this project. I turned over the engine, threw the dock lines off and had a couple hours on the bay, all systems go. I want to express my appreci…
Dear Tom, I just wanted to send along a testimonial to complement the recent restoration job your group did on my 50″ Cranchi Mediteranee express cruiser.
Matt and the other members of your team did an outstanding job in planning and executing the project which included repairing. prepping and painting the entire hull with Awlgrip. This included some redesign of the paint scheme for the boat and the final results were just beautiful. Our 9-year old boat looks better than it did the day it was d…
P.O. Box 4373
Annapolis, MD 21403
7416 Edgewood Road
Building 7401, Suite 5
Annapolis, MD 21403